Rules of the Road #7 - Signal Intersections Captioned

How to Understand Traffic Signs


  1. Know the different categories of traffic signs.
    • Regulatory signsregulate the flow of traffic and movement. They come in an assortment of shapes and colors. The most common regulatory signs are stop, yield, do not enter, one way, speed limit and school zone signs.
    • Warning signswarn drivers of upcoming traffic hazards, dangerous roads, and other situations that require caution. They are generally yellow or orange and diamond-shaped.
    • Marker signsannounce the route number of a highway/freeway or the direction a particular road can lead to. They are usually white or green. Route markers are blue with a red strip on top.
    • Guide signsinform drivers of destinations and distance, expressways and freeways, and work zones. They are generally rectangular and can come in a variety of colors.
    • Recreational and cultural interest signsare brown with white text, and they signal nearby points of interest. These are usually directed towards travelers, and highlight restaurants, gas stations, areas with potable water, lodging, land/water/winter recreation, and other services.

Regulatory Signs

  1. Stop signsare red and octagonal with white text.They tell drivers to come to a complete stop at the white line on the street. Drivers should look both ways to yield to pedestrians and oncoming traffic before proceeding.
    • Each stop sign comes with a label at the bottom that indicates how many cars at the intersection have a stop sign.
    • Two-waysigns tell you that two cars do; you and the car traveling opposite you on the same street. You must both yield to all cars on the cross street.
    • Three-waysigns are generally only present at intersections that have three streets, so they function in the same way asfour-wayandall-waystop signs. The car that arrives at the intersection first can leave first after coming to a complete stop. If two cars arrive at the same time, the one on the right has the right of way.
  2. Yield signsare red and white.They tell drivers to slow down and to prepare to stop if there are vehicles or pedestrians in the intersection.
    • An alternate version of a yield sign is a white rectangle that reads "TO ONCOMING TRAFFIC."
    • Some yield signs specify stopping for pedestrians, or announce that there is a pedestrian crosswalk you must stop for.
  3. Speed limitsindicate the speed that drivers should maintain on that street.It's generally acceptable to go 5 miles (8.0 km) above or below the speed limit, but anything beyond that can earn you a traffic ticket.
  4. Lane regulationsigns are white and tell drivers that they can only or cannot turn in particular directions (left, right, u-turn).They also indicate if lanes are reserved for certain vehicles (e.g., taxis, buses, trucks, etc.)
  5. Movement regulationare white and tell drivers if they need to stay/shift lanes, merge, or keep towards a certain direction.
  6. Selective exclusionsigns include do not enter and wrong way signs, usually in the color of red.They also specify if certain vehicles are prohibited on a street (e.g., buses, bicycles, vehicles with lugs, trucks, or motor vehicles); these are generally white.
  7. One waysigns are white and indicate that traffic only flows in one direction on that particular street.
  8. Parking regulationsigns specify times when parking is prohibited on that section of the street.
  9. Railroad crossingsigns are white and X-shaped.They indicate that railroad tracks are ahead, and drivers should prepare in case a train comes. This means not stopping in the middle of intersections and taking caution.

Warning Signs

  1. Turn and curvesigns tell you how the road ahead is shaped, and the direction that you should go in order to drive safely.Some signs are labeled with numbers that indicate the speed you should drive while making the turn or driving on the curvy street. Be extra careful in rainy conditions.
  2. Intersectionsigns demonstrate the shape of the approaching intersection.Watch for the cross traffic.
  3. Advanced traffic controlsigns can have self-explanatory words or other signs in a yellow, diamond-shaped sign.They'll indicate if there are stop signs, yield signs, traffic lights or altered speed limits ahead.
  4. Merge and lane transitionsigns warn you of upcoming changes to the road and how you should adjust accordingly.Signs may tell you to merge or warn you that traffic in a certain direction does not stop.
  5. Width restrictionsigns tell you that the road, bridge or ramp you are about to travel on narrows.You may need to merge lanes to adjust.
  6. Hillsigns indicate upcoming hills, and may tell you to adjust your car to a lower gear.They can also indicate the percent grade of the hill, which describes its slope.
  7. Pavement conditionsigns describe the condition of the road ahead -- whether it's rough, contains loose gravel, or uneven.They may also point out bumps and dips, so slow down if you see those.
    • The "NO CENTER STRIPE" sign is generally orange and indicates that there is no paint separating your lane and the lane for the oncoming traffic.
  8. Low clearancesigns indicate the ceiling height of the approaching area.If your car is taller than the labeled height, do not proceed ahead.
  9. Work zonesigns are orange and indicate upcoming construction projects.Proceed with caution and expect delays.
  10. Advisory speed limitslist the speed recommended for the street, but these are not officially enforced by the government.Thus, you cannot be cited for driving at a different speed there.

Marker Signs

  1. Route markerstell you the number of the interstate highway.They are blue with white text and a red stripe on top that reads "INTERSTATE." They come in the shape of a shield.
  2. Cardinal direction auxiliariestell you whether the highway you are about to enter leads to the north, south, east or west directions.
  3. Alternate route signscome in three flavors.White signs inform you of alternate routes and whether you need to bypass anything. Orange signs warn you of a detour and point towards the alternate direction you should take. Green signs tell bicyclists of the beginning and end of auxiliary paths.
  4. Directional auxiliariestell you of the possible directions you can proceed towards.They are white with black arrows.
    • Directional auxiliaries for bicyclesare green with white arrows, and function in the same way.

Guide Signs

  1. Destination and Distancesigns indicate freeway entrances and exits, the number of miles until certain major destinations are reached, street names, parking, weigh stations, and bike routes.These are generally green with white text, and may contain pictorial icons. An exception is signs that point to rest areas and general services (e.g., food and lodging), which are blue.
  2. Work Zone Informationsigns warn you of upcoming work zones and where they end.These are orange with black text, and require drivers slowing down, approaching with caution and expecting delays.
  3. General Informationsigns are green and indicate political boundaries (state/city/county lines) and the speed that signals are set for.These also include welcome signs from a certain city or state, which can be customized.

Community Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.


This video presents a variety of signs on the roadway and explains what you should do when you encounter them.
  • Stop sign: A stop sign means stop. If there is a painted white line by the stop sign, stop before it. If there is not a painted line, then stop so that you have optimum visibility through the intersection. If visibility at the intersection is poor, first stop behind the stop sign then creep forward until you can see clearly.
  • In school zones speed limits are usually 15 or 20 mph (24 or 32 km/h). Fines can double in school and work zones, so pay particular attention.
  • Yield sign: A yield sign means slow down. Be ready to stop. Let any traffic, pedestrians, or people on bicycles pass before you continue.
  • Speed limit signs: help regulate the flow of traffic. It’s illegal to drive faster than the posted speed limit.

Video: Learn Traffic Signs symbols studying teach free rules of the road dmv US meanings learning lesson

How to Understand Traffic Signs
How to Understand Traffic Signs images

2019 year
2019 year - How to Understand Traffic Signs pictures

How to Understand Traffic Signs recommend
How to Understand Traffic Signs forecast photo

How to Understand Traffic Signs pics
How to Understand Traffic Signs pictures

How to Understand Traffic Signs How to Understand Traffic Signs new images
How to Understand Traffic Signs new picture

pictures How to Understand Traffic Signs
picture How to Understand Traffic Signs

Watch How to Understand Traffic Signs video
Watch How to Understand Traffic Signs video

Communication on this topic: How to Understand Traffic Signs, how-to-understand-traffic-signs/
Communication on this topic: How to Understand Traffic Signs, how-to-understand-traffic-signs/ , how-to-understand-traffic-signs/

Related News

10 Trips Moms and Daughters Should Take Together
How to Measure Draw Length for a Bow
Why Amal Clooney’s Smart For Downgrading Her EngagementRing
How to Grip a Baseball Bat
Bourbon Carrot Cake
Henna Hair Dye 101: Everything You Need to Know BeforeTrying
Daily Deals: 30 Off At Banana Republic, Free Shipping At Philosophy
How to Evaluate the Statute of Limitations on Debt
Deze sterrenbeelden zijn de grootste stijliconen
How to Make a Pencil Holder from a Water Bottle
How to Deal With His Random Mood Swings
All White Outfits: How To Actually Pull Them Off And Avoid The Classic Pitfalls

Date: 17.12.2018, 14:02 / Views: 31182